Amazone is now offering two new rigid models of its trailed Ceus disc and tine combination cultivator in working widths of 3.0m and 4.0m. The successful combination of discs and tines can therefore also be used on smaller farm sizes and with tractors from 150hp.
The new Ceus 3000-TX and Ceus 4000-TX are equipped with central running gear and offer precision and versatility for both stubble and primary soil tillage, deep loosening and seedbed preparation. The combination of discs and tines means that the Ceus produces a perfect mix at working speeds of up to 15km/hr.
Straw, stubble or catch crops are finely shredded by the up-front discs and then, in conjunction with the following tine segment, the organic matter is evenly mixed, even where large quantities prevail. This combination of tools allows the Ceus to create the best conditions for rapid decomposition and excellent field emergence with minimal disease pressure on the following sowing operation.
The leading disc element is equipped with large-diameter discs that shred the organic matter and leave a fine crumbed soil structure for optimum sowing conditions. The discs are available in smooth and serrated versions and, thanks to the individual suspension, ensure a high level of through-passage and good contour following during their intensive cultivation. The stone release system via rubber spring elements is maintenance-free.
With a tine spacing of 40cm, the following tine segment reliably incorporates any organic matter, even in large quantities, and is easy to pull while maintaining a high level of through-passage. The depth of the tines can be adjusted down to 30cm. However, it’s also possible to work at shallower depths so that the point runs just below the working depth of the disc harrow in wet and heavy conditions. This loosens the horizon and creates a rough structure in the soil, thereby significantly reducing the risk of capping on these types of soil.
A selection of different C-Mix shares is available for the tine segment. The extensive range offers the right share for every area of application. Plus, the C-Mix Clip quick-change system, which enables the points to be exchanged easily and conveniently, is also offered. Various hard-wearing HD shares are also available for an extended service life.
The C-Mix Super tines are equipped with a pressure spring overload safety protection system for high levels of operational reliability, even under the toughest of conditions. As an option, the new C-Mix Ultra tines with automatic overload protection via hydraulic cylinders can also be specified for the Ceus-TX. Here the trip force can be infinitely adjusted up to 800kg. On the one hand, this ensures that the desired working depth of up to 30cm is precisely maintained. While on the other, the C-Mix Ultra system protects the cultivator from extreme loads by means of highly-damped resetting of the tine after tripping.
The tine segment is followed by a set of levelling tools that can be equipped with smooth or serrated discs or spring tine levellers from choice. The height and inclination of the side discs can be adjusted separately to ensure optimum match up from bout to bout.
Eleven different rollers and various rear harrows are available for that final reconsolidation. The roller can be removed in particularly wet conditions, for example in spring, and work carried out without reconsolidation so that the loosened soil can dry and warm up more quickly.
The option of hydraulic depth adjustment for optimum adaptation to the respective soil conditions is particularly convenient.
- Dealerships wanted to meet demand for Tuchel sweepers
- Reekie Ltd takes on Bauer irrigation equipment at Perth and Cupar depots
- Lemken: Steketee hoeing proves valuable in DeltaRow maize
- John Deere: New Gator snow blades and grit spreaders
- Pöttinger: Mechanical crop care range launched
- Michelin: Three new sizes added to AgriBib IF tyre range
- JF Hudson: Silo Crab minimises waste forage
- Collings Brothers representing Merlo again in the East of England
- Mastenbroek: Drainage plan increases yields and reduces black-grass
- Amazone: Flagship Tyrok 400 offers higher speeds for higher outputs
- Lemken: Latest Azurit drill can sow soy beans to sunflower seeds and apply microgranules
- Hutchinsons: Omnia and Claas collaboration extends connectivity ability
- Horsch: New model M expands Avatar drill range
- Yokohama: OHT division to double capacity of new plant in India
- DataConnect: Mixed fleets from five brands now viewable on a single portal of choice